The CAB-57 is a 16 gage steel wall mount equipment enclosure. The CAB-57 contains three MP-1 Mounting Plate footprints. These enclosures are designed for use with all LSN 2000 Fire Command Center components, such as the CP-40 Control Panel, DCM-32 Display Control Module, DCM-40 Display Control Module, SP-40 Strip Printer Module, PS-6A Power Supply, and the OCP-500 Output Connector Panel.
The removable front door is vented, contains a key lock for security, and can be installed on a left or right-hand door assembly. In the rear of the enclosure, mounting studs exist for the installation of the removable MP-1 Mounting Plate. Conduit knockouts are provided on all four sides Before mounting the CAB-31 or CAB-57 back box pull conduit connections and field wiring inside of the backbox before electronic equipment is installed.
When installing the CAB-31 or CAB-57 enclosure, the following must be considered:·
• Local mounting codes.
• The physical size and weight of the cabinet.
• Obstruction-free area, which would prevent the cabinet door from opening freely.
- Wall mount cabinet
- Available in gray
- Key lock front door
- Removable front door
- Conduits knock outs on all four sides
- Heavy Duty 16 gage steel
- Right or left opening front door
- 2 MP-1 Mounting Plate footprints in CAB-31
- 3 MP-1 Mounting Plate footprints in CAB-57
- Vented front door
CAB-57 | Enclosure Data Sheet